• Share this page:

Migraines at Work? Check the Lighting.

by Teri Robert, Lead Expert

If you find that you have more headaches and Migraines while at work, it may be the office lighting. Traditional office lighting generally presents three potential headache and Migraine triggers:

  1. Glare on computer screens from any overhead lighting
  2. Glare from overhead incandescent lighting
  3. Flicker from fluorescent lighting

Let's take a look at these three issues:

Glare on a computer screen from overhead lighting may be the easiest to address. There are several approaches you can take:

  • Reposition the monitor so the light hits it more indirectly.
  • Attach a glare screen to your monitor.
  • Put a hood over your monitor to keep light from hitting it from above and from the sides.
  • Depending on which lights are on the various switches, turn off the lights over your work area.
  • If other methods haven't worked, and you can't turn off only the lights in your own work area talk to your supervisor or other appropriate person about having the bulbs or tubes in your work area removed.

Glare from incandescent light bulbs can often be handled in a number of ways:

  • Try repositioning yourself to sit at different angles from the light.
  • Incandescent bulbs should never be left bare, but always covered by a fixture. In most cases, the fixtures will reduce the glare enough to eliminate the problem. If the problem persists, check the fixture. Is it frosted or opaque, or is it clear. If it's clear, replace it or ask your employer to replace it with a frosted or opaque fixture.
  • If these measures don't work, turn off the lights over your work area or ask to have the bulbs removed.

Unfortunately, the problem with fluorescent lighting is different and more difficult to address. Although generally imperceptible to the human eye, fluorescent lighting has a flicker. It's the flicker itself that's actually a Migraine trigger. Thus, it doesn't matter what kind of fixture houses the tubes. People who are sensitive to that flicker will have a problem with it. The best solution is to remove it from your immediate work area. Sit down and discuss the problem with your supervisor or other appropriate person. If whomever is in charge of maintenance has a problem with leaving a fixture empty, suggest that they simply replace the tubes in your work area with burned out tubes.

  • < Page
  • 1

Ask a Question

Get answers from our experts and community members.

Btn_ask_question_med
View all questions (4809) >